High Temperature Testing and Inspection
Reliable in-service inspection with our high temperature testing
Effective, efficient and safe plant operation requires a flexible maintenance strategy. To assist plant operators we developed equipment to execute Non-Destructive testing while a plant is in operation.
We provide high temperature testing for detecting and monitoring corrosion and other defects. Therefore, we have developed a set of “standard” procedures for temperatures up to 250° C. Our comprehensive non-destructive testing portfolio consists of cutting edge technology. Our qualified and experienced inspectors conduct high temperature testing while equipment is in full operation to save time and eliminate costs associated with shutdowns.
Our NDT specialists are ready to assist you with all of your high temperature inspection needs.
Monitor the condition of your assets with our state-of-the-art high temperature testing!
Productive and profitable performance with high temperature inspection
We provide comprehensive support throughout planning and preparation and conduct testing in accordance with your individual HSE requirements. With a high level of reproducibility, we can reliably examine a number of different geometries and accurately monitor damage progression. Results are presented in a clear and concise manner. We keep you up and running so you can concentrate on your business.
Benefits of our Non-Destructive Weld Testing Services at a Glance
With high temperature Non-Destructive testing from TÜV Rheinland you can be sure of:
- High reliability and reproducibility.
- Reduced down time resulting in reduction of production losses.
- Increased reliability due to accurate monitoring
- Possibility for accurate repair scoping before shutdowns
Our high temperature inspection services
We provide you the expertise needed to carry out in-service inspections at high temperatures. Our qualified and experienced inspection staff:
- Assists you with selecting the best suitable technique
- Carefully prepares the inspection
- Executes the inspection in a safe and accurate manner
- Establishes a clear and unambiguous report
| Technique | Application | Temperature range “standard” procedures | Possibilities special applications |
|---|---|---|---|
| ToFD | Defect detection | 250°C | 400°C |
| Phased Array | Defect assessment and monitoring | 250°C | 400°C |
| Corrosion Mapping | Corrosion measurements | 250°C | 400°C |
For the special applications additional efforts are required. Before execution a special procedure needs to be made and high-temperature tests must take place in the laboratory. Special test blocks may have to be fabricated for this purpose to simulate reality. Our laboratory provides facilities to carry out tests up to 500° C
Areas for application
- Non-Intrusive Inspections
- Weld root corrosion monitoring
- Defect monitoring
- Defect detection
- Corrosion assessment
- Inspection of partially filled welds during the welding process at interpass temperature
More information
Contact
/tuv-rheinland-tofd-time-of-flight-diffraction_core_4_3.jpg)