Wireless Lab

Tests for wireless products mainly consist of testing the radio spectrum on electrical or electronic products that intentionally emit and / or receive radio waves for radiocommunication and / or radiodetermination purposes. The EMC laboratory of TÜV Rheinland Italia (ISO 17025 accredited) verifies compliance with the harmonized Technical Standards according to the Essential Requirements of Directive 2014/53/EU (RED) for placing products on the European market

In December 2020, TÜV Rheinland Italia opened a second EMC test chamber equipped with the highest level of equipment that allows for countless tests. The dimensions of the chamber and of the turn table allow to carry out tests on products of considerable dimensions such as complete vehicles or electronic assemblies formed by different cabinets and control / actuation equipment.

Competence, professionalism, attention to the customer, services for access to international markets, are just some of the strengths of TÜV Rheinland Italia.

In the laboratory of TÜV Rheinland Italia, tests are carried out to verify compliance with directives / regulations (EMC, RED / R & TTE, ECE Regulation 10-automotive), such as emissions (detection of the electromagnetic field emitted by the products): survey of conducted (through the signal and / or power cables) and radiated (via ether) disturbance, survey of the emitted magnetic field, survey of harmonics and flicker (disturbances) introduced by the product on the power supply network; EMC characterizations in situ on railway equipment, machines, electronic equipment, industrial vehicles, industrial and civil environments; immunity: evaluation of the behavior of the apparatus under test when subjected to external electromagnetic stresses (electrostatic discharge, fast transient, surge, radiated and conducted electromagnetic field, preformed pulses according to automotive specifications, magnetic field, etc.); pre-compliance tests.

• ISO IEC 17025 (ACCREDIA)
• FCC
• ISED

• Band usage.
• Spurious.
• Modulation.

Compliance with major wireless systems:

• Wifi.
• Blue-Tooth.
• SRD.
• RF-IF.
• 3G.
• 4G.

• Household.
• Multimedia.
• Medical Device.
• Luminary.
• Pump.
• Machinery.
• EV Charger.
• PV inverter.
• Automotive components.
• Vehicles.

• ETSI 300 220
• ETSI 300 330
• ETSI 300 440
• ETSI 300 328
• ETSI 301 893
• ETSI 301 511
• ETSI 301 908
• ETSI 303 413
• ETSI 303 417

Set-up for:

• EIRP.
• Spuriuous emission.
• Band egde.
• Nr.2 SAC (3m, 5-10m, 5m turn-table up to 5 ton).
• Nr.4 Sheilded room.
• 2 set RF ampli (9kHz..6GHz).
• 4 RF receiver (10Hz..44GHz).
• Antennas form 9kHz to 40Ghz.

TÜV Rheinland Italia S.r.l.
Via E. Mattei, 3
20005, Pogliano Milanese (MI)

Tel. +39 02 939 687 331

E-mail:  informazioni@it.tuv.com